Types of home elevator systems

The main concept behind all kinds of elevators remains to be the same no matter if they are being installed at homes or on a commercial property.A hoistwayis created for a compartment which is then lifted up through various means. Depending on the features you are trying to achieve with them and things that you are ready to compromise on, there are four different types of domestic elevators you would have the opportunity to choose from.

Roped hydraulic system

This system works by combining the ropes with hydraulic systems.  Both the piston, which is connected using brackets to the hoist, and pistonare connectedto a hydraulic pump. There are then ropes, or strong steel cables, which arefastened to the floor of the shaft, then wound at the top of the pulley and then connected to the sling of the cab. This ensures that the ride is smooth and safe for everyone. This system works best for home since it doesn’t need too much of space. Dedicated space that would cover the machinery would be enough for this. Moreover, the hydraulic pipes can be run through your home like normal pipes to save you space and help you upholster the machinery at aconvenient place.

Winding drum

The counterweight and winding drum design use the age-old method where a revolving winch is used in collaboration with some counterweights to elevate and descend the lift. The attached electric motor helps to wind the cable around the drum to raise or lower the elevator. This type of elevatoris often attached for two reasons.Firstly because it is cheaper and secondly this system takes a lesser space and can be housed at the bottom or top of the hoistway.

PVE or Pneumatic vacuum elevators

If you think that an elevator with pistons, counterweights, chains,and cables can get a bit tricky for the limited elevator space you have at home, then PVE is the design you need to go after. It is built in a way to allow the use of the hoistway on its own for the pull-up system. To make this happen, this elevator is built using the parts that seem to fit perfectly together. The design is a tube where the cab, as well as the shaft, is in the shape of a tube. This design is crucial to maintaining the pressures inside the cab so that it can rise or come down smoothly with each pressure change.To rise, the pressure on the top is released to pull the lift up,and when descending down, a valve lowers the pressure to make the lift come down.

Traction drive elevators

These systems are very rarely seen in domestic space and are abetter fit for commercial locations.

These are four main types of the elevators systems that are seenin homes. If you want more information on the elevator systems and the type you need to select for your home elevator system, then click on the link right now.

About the author


Add Comment

Click here to post a comment

Your email address will not be published. Required fields are marked *

Contact Us